Saturday, 15 June 2013

Technical Support Assistant

Technical Support Assistant 

Job Number: 393960
Location: Washington, DC
Category: Information Technology
Security Clearance Status: Eligible
Security Clearance Type: Secret
Experience Level: Internship
Travel Required: 0%
Shift: 1st
US Citizenship Required: Yes
Posting Date: 06/14/2013

Candidate will support IT staff members in configuration, deployment and support of Windows 7 workstations. Candidate will be expected to follow instructions for imaging and deploying workstations. Candidate will report to designated staff personal and report on progress, issues and resolution. Candidate will be expected to follow the deployment schedule and report progress.
Required Education:
Required Experience:
Required Skills:
- Windows 7 administration/configuration experience - Attention to detail - Ability to follow documented procedures and direction - Ability to work in a Contractor/Government team environment - Good communication skills
Preferred Skills:
- Windows workstation configuration and deployment - Experience imaging Windows clients
BAE Systems is a premier global defense and security company with approximately 100,000 employees delivering a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support and services.

Information Solutions, based in Reston, Virginia, is among the 10 largest IT providers to the U.S. government, serving most of the federal defense and civilian marketplace. It provides network-centric command, control, computing, and intelligence (C3I) solutions; wideband networking radio systems; information systems for the U.S. intelligence community; geospatial information services; and information technology services. Leveraging its knowledge of signals and data derived from signals, Information Solutions has attained a market-leading position in advanced information technology research, intelligence analysis and production, and geospatial exploitation software.

People are the greatest asset in any Company ... 

BAE Systems is committed to a high performance culture and provides an environment that challenges our employees to be remarkable and obtain their full potential. 

We are an EEO/Affirmative Action Employer that understands the value of diversity and its impact on a high performance culture. 

Apply for post of Technical Support Assistant

IT Systems Training & Support

IT Systems Training & Support

Job Title:IT Coworker/Systems Training & Support
Location:Philadelphia (South Philadelphia)
Country: U.S.A.
Work Area: IT
Full Time - Part Time: Full Time
Job Type: Regular

Additional Information :
* Full time (32-40 hours/week)
* Must have night and weekend availability
* IT experience in a retail environment preferred
* Starting rate $14.49-$18.11
Job ID 163300BR
Removal Date 06/24/2013

ABOUT THE JOB Provide specialist support within the computer systems function to provide the best possible service to our customers.

YOUR ASSIGNMENT Your main tasks will include:
• Provide specialist competence within the computer systems function to maximize efficiencies across all departments to meet the identified customer demand.
• Facilitate computer systems training programs for coworkers
• Maintain high level of proficiency in store systems and PC skills and awareness of technology
• Diagnose system problems and make recommendations on resolution
• Establish good routines to ensure effective system use
• Complete general routines and ensure housekeeping is of the highest standard.
• Demonstrate a good understanding of policies, routines and procedures within your area of responsibility.
• Communicate to managers any customer issues/concerns that cannot be resolved
• Promote a safe working environment for fellow co-workers, customer and visitors by reporting any safety hazards, concerns or ideas for improvement.

Your knowledge, skills and experience include: COMPETENCE 2-3 years of experience in the following knowledge areas:
• Good customer service, and verbal communication skills
• Experience in a customer service or administrative environment
• Strong knowledge of computers and computer functionality with the ability to analyze and resolve PC and systems problems

Knowledge and interest in Home Furnishings
Effective verbal and written skills in the English language
• Contribute to an environment where the IKEA culture is a strong and living reality that embraces the diversity of co-workers and customers.
• Ability to work independently and in groups
• Basic computer skills
• Prefer fast-paced, retail work environment
• Basic math skills

Additional Information
Work Location: Fast-paced, deadline driven, high volume retail store
Physical/Mental Demands (Essential Functions): Having the ability to access and observe all areas of the store; to handle multiple and changing priorities/deadlines and moderate stress; to communicate with customers and co-workers and manage conflict; to lift and move 50 lbs (25 kg); to use the PC for extended periods during the shift; to wear PPE (personal protective equipment); and to use small power tools and related equipment.
• Physical/Mental Demands (Non Essential Functions): Bending, stretching, reaching, climbing, lifting and wearing required IKEA uniform

GROWING TOGETHER IKEA offers an exciting and empowering work environment in a global marketplace. And as the world’s leader at life at home, you have exceptional opportunities to grow and develop together with us.

Thursday, 13 June 2013

Welder jobs in Cashman

Welder jobs in Cashman

Requisition Number: 13-0130
Post Date: 6/13/2013
Title: Welder
City: Coeur Rochester
State: NV


  • Diagnose and perform repairs to equipment and parts that are broken or damaged and not economical to replace.
  • Design, fabricate and assemble components when necessary.
  • Display the ability to learn and apply new knowledge through attendance at technical classes to advance technical capabilities.


Position Purpose:
Support the strategic direction of the organization and the division. Demonstrate leadership, integrity, teamwork, quality and urgency in the performance of one’s functions and responsibilities to ensure the goals of customer loyalty, market dominance, profitability and safety are achieved.  

Essential Functions:


  • Diagnose and perform repairs to equipment and parts that are broken or damaged and not economical to replace.
  • Design, fabricate and assemble components when necessary.
  • Display the ability to learn and apply new knowledge through attendance at technical classes to advance technical capabilities.
  • Communicate effectively with customers, other employees and supervisor.


  • Maintain and utilize work areas, tools and equipment to promote a clean and safe environment.
  • Support, move and load equipment and vehicles safely.
  • Work varying shifts and overtime as business needs arise.
  • Adhere to company policies, procedures and safety regulations.  Use all safety equipment as necessary.  Report any unsafe acts or conditions.
  • Other duties and special projects as assigned.

Performance Standards:

  • Achieves customer satisfaction and profitability through quality maintenance, diagnosis, repair and percentage of reworks.
  • Meet flat rate and/or estimated hours allocated for each job.
  • Applies technical knowledge through regular attendance at technical training classes.
  • Effectively participates as part of team, leading and assisting where appropriate and requesting assistance when needed.
  • Achieves a customer focus by delivering high quality, cost effective service.
  • Adheres to company policies, procedures and practices.

Position Specifications:


  • High School diploma, GED or trade school equivalent.
  • Ability to read and understand materials commonly used in the product service and maintenance function (service and parts manuals, technical bulletins, and other related articles).
  • Strong verbal and written communication skills.

Technical Training:

  • Certificate of technical training and/or knowledge in welding and machinery.
  • Trained and certified to operate equipment and a lift truck.
  • Math skills for critical measurement.
  • Proficient computer technology skills, including ability to utilize company authorized software.


  • Minimum of two (2) years of welding experience.
  • Must meet personal tooling requirements for a welder.

Work Environment:

  • Shop/warehouse environment with exposure to heat, cold, wind, rain, dust, dirt and noise.
  • Field environment with exposure to adverse weather conditions including heat, cold, wind, rain, dust and dirt.
  • Valid Nevada Drivers License with an acceptable record.

Physical / Mental Abilities:

  • Professional attitude and appearance consistent with position and responsibilities.
  • Self-motivated and detail oriented, work with minimum supervision.
  • Stand/walk 8 - 10 hours a day, and/or sit 1 - 2 hours a day.
  • Frequently lift 50 - 100 lbs. 
  • Must use hands for repetitive simple grasping, pushing, pulling and fine manipulation.
  • Must be able to occasionally bend, squat and climb, including the ability to ascend and descend ladders.
  • Must use feet for repetitive movement when operating equipment controls.
  • Must have agility and balance to safely climb on all machines.

This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job.  While this is intended to be an accurate reflection of the current job; management reserves the right to revise the job or to require that other or different tasks are performed when circumstances change (e.g., emergencies, changes in personnel, workload, rush jobs, or technological developments).

Apply for welder jobs in cashman



Welders - Structural

Welders - Structural

Structural Welders

Job ID : 2013-3074
No. of Openings : 8
Location : US-TX-Houston
Category: Manufacturing & Industrial

Jobs Posted : 13/06/2013

Since its inception in 1984, NCI has become one of the largest integrated manufacturers and marketers of metal coil coating solutions, metal components and custom metal building systems for the non-residential construction industry in North America. Product innovation, organic growth and numerous strategic and highly advantageous acquisitions have led to the continued development of this successful organization..

Structural MIG Welders: Must own leather steel toe boots. Other warehouse duties as assigned.
Fitters: Lay out, fit, and fabricate metal components to assemble structural forms, such as machinery frames, bridge parts, and pressure vessels, using knowledge of welding techniques, metallurgy, and engineering requirements. 

These positions are budgeted, based on experience and are full time with overtime available and benefits to include: Daily overtime,paid time off, paid holidays, monthly production bonuses, and 80% company paid insurances.


  • Salary requirement MUST be within Budget
  • High School Diploma or GED preferred
  • Able to read blueprints is preferred
  • Must be a self starter and eager to learn
  • Must have completed Vocational Course MIG in welding or have 1 year experience in welding
  • GMAW welding skills required. (Must be able to pass an AWS weld certification test).
  • Must be able to operate MIG welders, measuring tools, grinders, torches, other hand tools and hammers.
  • Good communication skills.
  • Experience in overhead crane operation helpful.
  • MUST be able to pass Background & Drug Screen

 Apply for Structural welder jobs


Welders - Steel Fabricator


Position Available - Welder

Must be a qualified welder / fabricator with experience in steel or aluminium (NDT experience preferred but interest to train if not available) and ideally have a driving licence. Duties include MIG/TIG and MMA welding / fabricating. All welding / fabricating processes will be subject to high standard testing such as x ray, fault detection and pressure test in a non destructive testing environment. Each day will provide new challenges and a different aspect of work, this is not a production line role. This position also offers an immediate start. Overtime may be available at weekends and evenings. You may be required to travel off site at our customers’ depots (vehicle provided). This is not an agency position. Employer states successful applicants will need to be drugs and alcohol tested before employment commences.

Employer now provides a sick scheme available and in process of pension scheme. 25 days holiday plus bank holidays.

Please send your CV to our Administration team via email:

Apply for Welder / Steel Fabricator jobs




Coded Welders

Workstream Job Reference: 1306-223
Skills Required: Coded Welder
Location: Oxford
Places: 2
Job Type: Temporary/Contract
Start Date: ASAP
Consultant: Luke Coggins
Telephone: 01280 848888
Posted: 12/06/2013 (17:06)

Workstream’s client is looking for two experienced Coded Welders to work on a site in Oxford. It is essential that applicants are qualified to 6G and have BSEN 287 coding. The successful applicants will need to do core 10 material, 10-15mm welds. Additionally, candidates must have valid CSCS and IPAF tickets.

The duration of these contracts is ongoing, with immediate starts. The pay rate for Monday-Friday is £15.00 per hour, Saturday is £19.00 per hour for first six hours and then £22.50 for over six hours on a Saturday and all hours worked on a Sunday.

If you would like to apply for one of these positions, please call Workstream's Bicester head office on 01280 848888 (Monday-Friday, 09:00-17:30) or use the email link below to send us your CV and a covering letter.

Workstream welcomes job applications from all suitably qualified candidates. We regret, however, that we are unable to offer employment to anyone without documented proof of their right to live and work in the EU/EEA.



Monday, 10 June 2013

experience Certificate for system administrator

Experience Certificate for system administrator

experience Certificate for system administrator  -1

experience Certificate for system administrator -2

experience Certificate for system administrator 3
experience Certificate for system administrator  4

experience Certificate for system administrator  5